文档预览： Application Note AC327 April 2009 1 2009 Actel Corporation UART-to-SPI Interface Design Example Contents Overview This document provides design details and usage for the universal asynchronous receiver/transmitter (UART) to serial ... 点击下载

文档预览： Family of SpiFlash Memories – W25Q64BV: 64M-bit / 8M-byte (8,388,608...The Write Status Register instruction allows the Block Protect bits (SEC, TB... 点击下载

文档预览： 2008 Nuvoton Technology Corporation America all rights reserved. Important Notice...SPIFlash interfaceI2S interfaceLOOP_DET HOOK_DET PULSE_DIAL13 14 15 16 17 ... 点击下载

文档预览： The STM3210B-EVAL board is delivered with the demonstration and the DFU (device firmware upgrade) programmed in the internal Flash memory, and all the ... 点击下载

文档预览： { int req,status;blkdev_request arg_nand; req = BLKIO_REQUEST; arg_nand.start = lba; arg_nand.count = 1; arg_nand.bufs[0].buffer = buff; arg... 点击下载

文档预览： The STM3210B-EVAL board is delivered with the demonstration and the DFU (device firmware upgrade) programmed in the internal Flash memory, and all the ... 点击下载

文档预览： The STM3210B-EVAL board is delivered with the demonstration and the DFU (device firmware upgrade) programmed in the internal Flash memory, and all the ... 点击下载

文档预览： While the discussion throughout this document focuses on the ADSP-BF537 processor, the concepts can be applied to all Blackfin processors, so long as ... 点击下载

文档预览： Family of SpiFlash Memories – W25Q32: 32M-bit / 4M-byte (4,194,304...However, all instructions that Write, Program or Erase must complete on a ... 点击下载

文档预览： Simultaneously Sampled Inputs True bipolar analog input ranges: ±10 V, ±5 V Single 5V Analog Supply, 1.8V to +5V VDRIVE 1MΩ Analog Input Impedance... 点击下载