3.5X2.8mm SURFACE MOUNT SMD CHIP LED
Part Number: AAAF3528QBFSEJ3ZGW
ATTENTION
OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES
Blue Hyper Red Green
Features
Outstanding material efficiency. Low power consumption. Can produce any color in visible spectrum, including white light. Suitable for all SMT assembly and solder process. Available on tape and reel. Package: 1500pcs / reel . Moisture sensitivity level : level 4. RoHS compliant.
Description
The Blue source color devices are made with InGaN Light Emitting Diode. The Hyper Red device is based on light emitting diode chip made from AlGaInP. The Green source color devices are made with InGaN on Sapphire Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded.
Package Dimensions
Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAI9804 APPROVED: WYNEC
REV NO: V.6A CHECKED: Allen Liu
DATE: DEC/24/2011 DRAWN: Y.H.Wu
PAGE: 1 OF 7 ERP: 1201004515
Selection Guide
Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Min. 120 Blue (InGaN) *120 900 AAAF3528QBFSEJ3ZGW Hyper Red (AlGaInP) White Diffused *300 480 Green (InGaN)
Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. *Luminous intensity value is traceable to the CIE127-2007 compliant national standards
Viewing Angle [1] 2θ1/2
Typ. 250 *250 1700 *550 900 *550
120°

下一页