Document Number: 34240 For technical questions, contact: magnetics@vishay.com www.vishay.com
Revision: 17-May-11 1
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Low Profile, High Current IHLPR Inductors
IHLP-2525BD-A1
Vishay Dale
Manufactured under one or more of the following:
US Patents; 6,198,375/6,204,744/6,449,829/6,460,244.
Several foreign patents, and other patents pending.
Notes
(1) All test data is referenced to 25 ¡ãC ambient
(2) Operating temperature range - 55 ¡ãC to + 125 ¡ãC
(3) DC current (A) that will cause an approximate T of 40 ¡ãC
(4) DC current (A) that will cause L0 to drop approximately 20 %
(5) The part temperature (ambient + temp. rise) should not exceed
125 ¡ãC under worst case operating conditions. Circuit design,
component placement, PWB trace size and thickness, airflow
and other cooling provisions all affect the part temperature. Part
temperature should be verified in the end application.
FEATURES
¡¤ Lowest height (2.4 mm) in this package
footprint
¡¤ Shielded construction
¡¤ Frequency range up to 5.0 MHz
¡¤ Lowest DCR/¦ÌH, in this package size
¡¤ Handles high transient current spikes without
saturation
¡¤ Ultra low buzz noise, due to composite
construction
¡¤ AEC-Q200 qualified
¡¤ Compliant to RoHS Directive 2002/95/EC
APPLICATIONS
¡¤ Engine and transmission control units
¡¤ Diesel injection drivers
¡¤ DC/DC converters for entertainment/navigation systems
¡¤ Noise suppression for motors
- Windshield wipers
- Power seats
- Power mirrors
- Heating and ventilation blowers

ÏÂÒ»Ò³