焊 接 工 艺 规 程 (WPS)
WELDING PROCEDURE SPECIFICATION
WPS No.: WPS-H005 PAGE 1 OF 3 DATE 2003.03.10
公司名称Company Name
依据的PQR编号Supporting PQR No. PQR-07 签字人 BY(QA DIRECTOR) 生效日期Date
焊接方法 Welding Process MAG 自动化等级Type(s)Semi-Auto (Automatic,Manual,Machine,Semi-Auto.)
接头 JOINTS
接头型式Joint Design Vee "V"型接头
衬垫Backing(有/Yes) × (无/NO) 垫块Retainers(有/Yes) (无/NO) ×
(Refer to both backing and retainers.)
衬垫材料(型号) Backing Material(Type) Base metal
[ × ]金属Metal; [ ]不熔化金属Non-fusing Metal; [ ]非金属Non-metallic; [ ]其它Other
Sketches,production drawings,weld symbols or written description should show the general arrangement of
The parts to be welded. Where applicable,the root spacing and the details of weld groove may be specified.
母材 BASE METALS
类别号P—No. 组号Group No. 1 与类别号to P—No. 组号Group No. 1 相焊, 或or
钢号/等级为Specification Type and Grade St52-3 与钢号/等级为to Specification Type and Grade St52-3 相焊, 或or
化学成分/力学性能为Chem.Analysis and Mech. Prop. 与化学成分和力学性能为 to Chem.Analysis and Mech. Prop. 相焊
厚度范围Thickness Range: 母材Base Metal: 坡口焊Groove 3～24mm 角 焊Fillet not limited
管径范围Pipe Dia. Range: 坡口焊Groove Not Limitted 角 焊Fillet not limited
其它Other
填充金属 FILLER METALS
SFA No.
Special
AWS No.(Class)
ANSI/AWS A5.18 ER70S-6 上海中钢焊材有限公司
F—No.
None
A--No.
NA
填充金属尺寸 Size of Filler Metals
Φ1.2mm
焊 接 工 艺 规 程 (WPS)
WELDING PROCEDURE SPECIFICATION
WPS No.: WPS-H005 PAGE 2 OF 3 DATE 2003.03.10
熔敷焊缝金属厚度范围 对接焊缝
Deposited Weld Met.Thickness Range: Groove
max 24mm
角焊缝Fillet
not limited
焊丝一焊剂Electrode-Flux (Class)

下一页